POLIFLUID®

A patented system for powder coating: visibly better finishing with powder reaching the most difficult areas. Among the many advantages of the Polifluid system is colour uniformity and savings of coating materials allowing end users to powder coat with excellent results, without the need to make expensive modifications or replacement of existing coating equipment.

Benefits of Using Polifluid

POLIFLUID® concentrates the nitrogen contained in compressed air through the principle of elective permeation and uses it as a fluid carrier during all stages of powder
application. The temperature control of the fluid carrier and the positive or negative ionization further enhance the inherent performance advantages of the system.

POLIFLUID® produces inert, anhydrous and clean fluid carrier and enables constant humidity and temperature : two previously uncontrolled variables. The application conditions can therefore be controlled and consistent all day long and through all seasons.

POLIFLUID® guarantees a significant increase of transfer efficiency and higher performance,
expressed in m²/kg of powder used. The Return on Investment (ROI) has been calculated to be from 6 to 8 months on average

POLIFLUID® is installed between the air compressor and the powder coating application point. It doesn’t replace users’ existing equipment but operates with it, feeding:

  • electro-static application.
  • tribo static application.
  • fluidizer bed.

How does POLIFLUID® fit in to your line?

On a Reciprocator Line

Simply put the POLIFLUID® unit in the line so it feeds the guns and the hopper and watch the quality and savings automatically increase.

What size POLIFLUID® do you need?

Designed to be used with no more than one powder coating gun

N² Production – 10Nm³

Compressed Air Inlet Pressure – 8.5Bar/G

Ionization +/- 0

Faraday Cage effect Reduction

Designed to be used with 1 or 2 powder coating guns

N² Production – 20Nm³

Compressed Air Inlet Pressure – 8.5Bar/G

Ionization +/- 0

Faraday Cage effect Reduction

Designed to be used with between 2 and 30 powder coating guns in various sizes depending on requirement

Scroll to Top